Helios Seaside Infrared Outdoor Heater
$895.00 inc GST
The Helios Seaside short-wave infrared Heater is specifically designed for the seaside and areas with corrosion problems.
- Stainless steel enclosure design.
- Instant heat within 1 second.
- 92% of radiant efficiency.
- InFraCaLoR® halogen lamps have up to 5000 hours of life.
The Helios Seaside short-wave infrared Heater is specifically designed for the seaside and areas with corrosion problems. It is designed for wall installation and has an element sealed behind a safety glass. When using infrared heaters in places with a high salt content in the air, such as on a beachfront, heating elements must be protected to give longevity!
- The most efficient Infrared: Short-wave has 92% radiant efficiency which means you feel warmth even in windy conditions because heat does not drift away on the breeze.
- Market-leading performance – the widest and longest heat projection available for a 2000W heater with the element behind safety glass.
- Instant heat – full power within 1 second of switching on means no wasted energy pre-heating.
- Stainless steel enclosure – reduces rusting and corrosion due to environmental factors, increasing its life.
- Designed for outdoor use – weatherproof so can be operated outside undercover or where only lightly exposed to rain.
- Gold halogen lamp gives a healthy and comforting glow of warmth to your outdoor space.
- Long-life – InFraCaLoR® halogen lamps have up to 5000 hours of life (when sealed behind safety glass), meaning low maintenance costs.
Contact Us HERE or call 08 7122 1114 to take advantage of our complimentary design service. Our expert team will customise an efficient layout plan to fit your space/project.
The Helios Seaside is designed for salt exposed areas particularly those near the beach. The element is sealed behind a safety glass to protect it from attack by salt laden air typical of seafronts. The heater casing is stainless steel which reduces rusting or corrosion. Installation is generally using a wall bracket. Mounting height is generally lower than non-glass fronted Heliosa heaters as the safety glass reduces the distance that the heat can be projected. Finally, the heater has a 3m lead but no plug so that it can be wired into an electrical circuit. If you wish to have a plug attached prior to shipment, you need to make a note in the ‘Comments’ section at check out – we can do this at no extra cost to you.
- Rec. mounting height: 2.2-2.5m.
- Rec. mounting angle: 30° – 45° from horizontal.
- Throw: 2.5 – 3.0m.
- Spread: 3.5 – 4.0m.
- Coverage: Approximately 12m².
- Distance between appliances: 2.5m.
- Enclosure: Inox Stainless-steel with polished aluminium reflector.
- Colour: Stainless Steel.
- Electrical supply: 220-240V ac 50/60 Hz single phase.
- Power consumption: 2.0kW. Insulation: Class 1.
- Environmental protection: IP23 (can be sprayed by light rain).
- Element life: Up to 5000 hours (nominal when behind safety glass).
- Dimensions: 50x 23 x 16cm (whd).
- Weight: 4.5kg.
- Cable: 3.0m silicon insulator cable.
- Other: Robax® high emissivity glass front. Stainless steel tilt & swivel wall bracket included.
